Horizon Elephant Blurolls 2pcs*120mm/8''/220mm/10''/12''/16''/500mm PEI Sheet for 3D Printer Build Surface Polyetherimide Ultem
Наличие: В наличии
Внимание: ограниченное количество товара в наличии!
Доступно с даты:
PEI Sheet for 3D Printer Build Surface Polyetherimide Ultem
PEI (Polyetherimide) sheets provide a 3D printing build surface that requires no tape, slurry, or adhesive. ABS and PLA both stick extremely well to the surface, which eliminates the need for support rafts used for better adhesion. longtemperature is 150.
How to Use:
Special note - Please remove both sides of the teal colored protective film before using.
Cut the PEI sheet to size by scoring with a hobby knife. There are two methods to attaching the PEI to your print bed. The first method is to just clamp the sheet to the print bed using binder clips. We find that 2 on each side works great.The second method, get 3M 468MP Transfer Tape and use it to stick the PEI to the print bed.
Once the PEI sheet is attached, re-level your print bed and you are ready to go!
It helps to wipe the surface down with isopropyl alcohol, methyl alcohol, or soap in between prints. This will ensure the PEI is clean, and help adhesion. Light sanding with 5000 grit paper will also give the PEI sheet more life.
Size Options 8x8 inch(i.e 200x200mm) 220x220 mm 10x 10 inch(i.e 250x250mm) 12x 12 inch(i.e 300x300mm) 16 x 16 inch(i.e 400x400 mm) 500 x 500 mm 120x120mm PEI sheet thickness: 0.8 mm
|Единица измерения||lot (2 шт./lot)|
|Вес посылки||0.35kg (0.77lb.)|
|Размер посылки||35cm x 35cm x 10cm (13.78in x 13.78in x 3.94in)|
|Size||1.4mm, 1.2mm, 0.3mm, 0.4mm, 0.6mm|
|Brand Name||Horizon Elephant|